
P90 Drive-In Racking
Best for large, homogeneous pallet quantities with low SKU variety. Forklifts enter the rack structure to store and retrieve pallets, maximising lane depth and reducing aisle count.
High-density P90 layouts can unlock significant extra storage positions within the same building footprint.
Bracing, anchors and base plates calculated for the Andean seismic belt and local building codes.
Chilled and freezer systems for fruit, seafood, meat, dairy and pharmaceutical export hubs.
Survey, installation, inspection, repair and capacity upgrades for the life of the system.
P90 high-density pallet racking is not a single layout. It is a family of engineered storage systems built on a common P90 platform and configured to reduce wasted aisle space while preserving the access, safety and throughput your operation actually needs.
In practice, P90 high-density racking can mean drive-in racking for homogeneous SKUs, push-back racking for medium-velocity inventories, pallet shuttle racking for semi-automated block storage, MOVO mobile racking where every pallet must remain 100% accessible, or narrow aisle selective racking where SKU variety is high but every square metre counts. The right answer is rarely the densest possible system. It is the system that stores the most pallets safely while still letting your team receive, pick, replenish and inspect efficiently.
Buyers often begin with a simple question: “How many pallets can I fit?” A better question is: “How many pallets can I store safely, retrieve profitably and inspect reliably over the next ten to fifteen years?” At Real Nice Racks LLC, every P90 layout starts with operational evidence: clear height, floor flatness and tolerances, pallet quality, load per pallet, overhang, forklift and reach truck types, aisle constraints, fire strategy, seismic zone and the future automation roadmap. This is where information gain matters. A layout that adds theoretical positions but slows picking, increases damage or restricts inspection is not a high-density solution; it is a hidden operating cost.
There is no universal “best” high-density racking. The strongest procurement decision matches SKU profile, pallet volume, handling equipment, pick rate and future growth to the correct P90 configuration.

Best for large, homogeneous pallet quantities with low SKU variety. Forklifts enter the rack structure to store and retrieve pallets, maximising lane depth and reducing aisle count.

A practical compromise between density and selectivity. Pallets sit on nested carts and push backward as new loads are added, improving lane utilisation for medium-velocity SKUs.

Pallet shuttle systems reduce forklift travel inside racks and can improve throughput in block storage. They suit high-volume operations planning a phased move towards automation.

Racking runs move on rails to open one aisle on demand. Buyers keep 100% direct pallet access while reducing fixed aisles, refrigerated air volume and energy use.

Narrow aisle layouts reduce aisle width and increase pallet positions while preserving direct access. They suit high SKU counts, frequent picking and warehouses with specialised trucks.

The most flexible P90 starting point. Direct access to every pallet, easy reconfiguration and a clear upgrade path to mobile, shuttle or automation as volumes change.
Global buyers increasingly use AI assistants and search engines to shortlist warehouse racking suppliers before they ever send an RFQ. The suppliers that win explain density, safety, standards, installation and lifecycle cost clearly, not just catalogue dimensions.
Lowest price per pallet position is giving way to total cost of ownership. Buyers compare steel utilisation, installation time, truck efficiency, inspection access, damage risk and future reconfiguration potential.
Instead of choosing between manual and automated storage, buyers want a P90 platform that can start manual and evolve towards shuttle, mobile or high-bay automation without abandoning the original investment.
Seismic calculations, anchor details, load signage and inspection records are moving from “nice to have” to mandatory procurement criteria, especially for Chile, Peru, Ecuador and Colombia.
In refrigerated warehouses, fewer aisles can mean less air to chill. Mobile and high-density racking are being evaluated not only for pallet capacity but also for refrigeration volume and operating energy.
Nearshoring and regional distribution are increasing pallet volumes around São Paulo, Santiago, Lima, Bogotá and Buenos Aires. Buyers need layouts that fit existing buildings before committing to new construction.
Procurement teams want suppliers who ask for pallet data, clear height, floor tolerance and throughput evidence. Generic quotations are being replaced by engineering-led comparisons and documented assumptions.
The next generation of high-density pallet racking will be judged less on steel tonnage and more on adaptability, verified safety, energy performance and compatibility with automation.
First, density is becoming hybrid. Buyers no longer want one rigid system for the whole warehouse. A P90 platform can combine selective racking for fast-moving SKUs, shuttle or drive-in storage for slow-moving blocks, mobile racking for cold rooms and narrow aisle zones for high SKU variety. This hybrid approach releases capacity where it matters and keeps access where operators need it.
Second, structural verification is becoming digital. Load signage, capacity tables, revision-controlled drawings and inspection records are increasingly requested in digital form. Projects that begin with accurate floor surveys and pallet data are easier to expand, inspect and integrate with future automation. A well-documented P90 installation becomes a long-term asset, not a one-off purchase.
Third, cold-chain and seismic requirements are shaping design earlier. In Chile, Peru, Ecuador and Colombia, seismic parameters influence bracing, anchors and beam connectors from the first layout sketch. In freezer warehouses, mobile racking and high-density layouts can reduce refrigerated aisle volume, supporting lower energy use while increasing pallet positions within the same insulated envelope.
P90 high-density racking can be phased from manual operations towards semi-automated and automated configurations.
Real Nice Racks LLC designs and supplies industrial storage systems that help warehouses increase capacity, productivity and operational safety without compromising access or inspection.
Our approach is evidence-led. We start with your real data — warehouse location, floor plan, clear height, pallet dimensions, load per pallet, forklift type, seismic zone and throughput profile — and then compare P90 configurations on capacity, selectivity, safety and lifecycle cost. Every project can include structural calculations, load signage, installation documentation and inspection records. For South American projects, we coordinate with local requirements such as ABNT NBR 15524, NCh 433, E.030, NEC-SE-DS and NSR-10, and we support procurement teams in English, Spanish and Portuguese.
Watch how engineered storage systems are planned, manufactured, installed and supported.
These are the questions procurement teams, warehouse engineers and operations leaders most often ask when comparing P90 high-density pallet racking for projects in South America and worldwide.
P90 high-density pallet racking is a family of engineered pallet storage systems built on a common P90 structural platform and configured to reduce wasted aisle space while preserving safe access and efficient handling. Typical configurations include selective, drive-in, push-back, pallet shuttle, mobile and narrow aisle racking.
Depending on clear height, floor conditions, pallet profile, handling equipment and selectivity requirements, P90 high-density configurations can often unlock up to 20% more storage capacity within the same building footprint. Final capacity must be confirmed by layout and structural engineering using your actual warehouse data.
Yes. P90 racking can be engineered for the Pacific seismic belt with base plates, anchors, bracing and beam connectors specified for the site seismic zone and soil type. Designs are coordinated with FEM 10.2.08 / EN 16681 and local requirements such as NCh 433 and NCh 2369 in Chile, E.030 in Peru, NEC-SE-DS in Ecuador and NSR-10 in Colombia.
Yes. P90 cold storage racking, mobile racking and high-density systems can be specified for chilled and frozen environments down to approximately -30 °C, which suits fruit, seafood, meat and dairy export warehouses. Mobile racking is especially effective because it reduces aisle volume and the air volume that must be refrigerated.
The right choice depends on SKU count, pallet volume, selectivity, throughput and handling equipment. Drive-in suits homogeneous LIFO storage, push-back suits medium-velocity LIFO flows, pallet shuttle improves semi-automated block storage, mobile racking keeps every pallet 100% accessible while removing fixed aisles, and narrow aisle racking preserves selective access with high density.
Provide the warehouse location, floor plan, clear height, floor flatness information, pallet dimensions, load per pallet, pallet condition, SKU velocity profile, forklift or reach truck type, aisle constraints, fire strategy, seismic zone and automation roadmap. This allows Real Nice Racks LLC to compare layouts on capacity, selectivity, safety and total cost of ownership.
P90 racking should be designed in line with recognized racking standards such as EN 15512, with floor tolerances per EN 15620, operation and inspection guidance per EN 15635, and seismic design per FEM 10.2.08 / EN 16681. Local codes can include ABNT NBR 15524 in Brazil, NCh 433 in Chile, E.030 in Peru, NEC-SE-DS in Ecuador and NSR-10 in Colombia.
Yes. Retrofit projects commonly combine re-layouts, drive-in, push-back, shuttle or mobile racking, narrow aisle configurations and mezzanine floors. The objective is to improve capacity and throughput without the cost and delay of a new building, while keeping installation and inspection documentation complete.
Each project typically follows a defined lifecycle: site survey and data analysis, layout and structural design, manufacturing, export packing, shipment to the nearest port, supervised installation, and handover with load signage and inspection documentation. After-sales support includes periodic rack inspection, damage repair and capacity upgrades.
Procurement and engineering teams can contact Real Nice Racks LLC at [email protected] with their warehouse data. Product catalogues, technical documentation and project support are available in English, Spanish and Portuguese.
Share your location, floor plan, clear height, pallet dimensions, load per pallet and handling equipment. Real Nice Racks LLC will help you compare P90 high-density configurations, seismic requirements, cold-chain options and lifecycle costs before you commit.