More pallets in the same building
Narrow aisles, mobile racking and lane storage add positions without a new building.
- Narrow aisle racking
- Mobile racking MOVO
- Drive-in racking
Engineered storage for high-density, cold-chain and seismic-zone warehouses across South America.
Every system is built around the P90 platform, so a warehouse can start with adjustable racking and later add lanes, mobile bases or automation without replacing the structure.
Pallet racking stores goods on pallets in a steel structure of upright frames and beams. The right system depends on how quickly you need access to each pallet, how many pallets you hold per SKU, whether stock must rotate first in first out, and the clear height, floor condition and seismic zone of your building.
Real Nice Racks LLC supports overseas buyers and project teams with layout guidance, load data, standards documentation and export-ready supply. Systems are configured for the pallet sizes, forklift fleet and climate conditions of your site rather than a generic catalogue footprint.
Start from your operational situation. Each route indicates the racking systems that usually fit and the technical questions to confirm at layout stage.
Narrow aisles, mobile racking and lane storage add positions without a new building.
Less air volume to cool, with mobile racking suitable for chilled and frozen operations.
Expand, rearrange or upgrade P90 racking in phases while operations continue.
Lane storage holds several pallets one behind the other and needs fewer aisles.
Walkways built into the racking create pick lanes above each other.
P90 is the base for shuttles, crane racking and automated high-bay storage.
Compare the main configurations by selectivity, density and handling method, then match the system to your goods flow and building constraints.
Direct access to every pallet with adjustable beam levels and widely used wide-aisle layouts.
Space-saving storage for warehouses where floor area is limited but every pallet must remain accessible.
Lane storage for large quantities of similar goods, with the forklift entering the lane to handle pallets.
Pallets sit on carts or rollers and push back into the lane, improving density while keeping the face accessible.
A semi-automated shuttle moves pallets inside the channel while the forklift remains at the lane entrance.
Racking runs move on rails to open a single working aisle where needed, raising density without losing direct access.
Procurement teams, insurers and operations managers increasingly ask for evidence, not just a product description.
Pallet racking supplied by Real Nice Racks LLC is specified around the P90 platform, with components and load data documented to recognised standards. This gives project teams a clear basis for tender review, installation planning and long-term safe use.
For technical documentation, load tables or a project-specific specification, contact [email protected].
Supervised installation with documented handover, load signage and inspection records.
A clear project sequence keeps responsibilities, budgets and timelines visible for multi-country rollouts.
We record goods, processes, growth plans and safety requirements on site or from drawings.
A modular P90 layout that can be expanded, retrofitted or automated later.
Technically checked scope, capacity comparison, timeline and cost basis.
Kick-off, detailed planning and milestones before production begins.
Export packing, shipment to the agreed port and supervised installation with documentation.
Inspection, maintenance, spare parts and retrofit support for the life of the system.
Clarify these points early. They determine which system fits and prevent costly changes late in the project.
Early data collection avoids late changes to aisle widths, beam levels and floor preparation.
A European garden products distributor planned standard P90 racking with rails already prepared for mobile racking.
Four years later, the existing racking was reused and placed on mobile bases where needed. The conversion ran in three phases with very little disruption to daily storage and picking. Once commissioned, the installation doubled storage capacity within the same warehouse.
Mobile racking can be phased into an operating warehouse without replacing the original racking structure.
Racking performance depends on more than beams and uprights. The right accessories protect the structure, support unusual loads and help teams use the system safely every day.
After handover, the focus shifts to safe use, damage prevention and keeping storage capacity aligned with business growth.
Visual checks by trained staff and expert inspection at planned intervals, with a report, damage identification and replacement recommendations.
Support for damaged beams, uprights and accessories, with agreed service scope depending on the project location and operating conditions.
Original components, layout records and technical guidance to keep the installation compliant and ready for future expansion.
Contact [email protected] for service and spare parts enquiries.
Start with four questions: do you need access to every pallet, how many pallets do you store per product, must stock rotate first in first out, and how much floor space and clear height are available. These answers determine whether adjustable, narrow aisle, drive-in, push-back, shuttle, mobile or multi-tier racking is the better fit.
Yes. Racking for the Pacific seismic belt is calculated with reference to FEM 10.2.08 and EN 16681, and coordinated with local requirements such as NCh 433 and NCh 2369 in Chile, E.030 in Peru, NEC-SE-DS in Ecuador and NSR-10 in Colombia. Base plates, anchors, bracing and beam connectors are specified for the site seismic zone and soil type, with final calculations reviewed by a locally licensed structural engineer where required.
Static steel racking is designed in line with EN 15512, with floor tolerances per EN 15620, operation and inspection guidance per EN 15635, and seismic design per FEM 10.2.08 and EN 16681. In Brazil, projects are aligned with ABNT NBR 15524 for selective pallet racking. Load signage, capacity tables and inspection records are supplied for the installation.
Yes. Cold storage pallet racking, mobile racking and high-density systems are specified for chilled and frozen environments down to approximately -30 °C, with -40 °C options where required. This suits fruit, seafood, meat and dairy export hubs in Chile, Peru, Ecuador, Argentina and Brazil. Mobile racking such as MOVO is especially effective because it reduces the volume of air that must be refrigerated.
With drive-in racking the forklift drives into the lane to place or retrieve pallets. With a pallet shuttle, a semi-automated shuttle moves pallets inside the lane while the forklift stays at the entrance, reducing forklift movements. The shuttle can work in FIFO or LIFO mode.
Yes. A common combination is adjustable racking in high-turnover picking zones and drive-in racking or pallet shuttle racking for reserve stock. All systems on the P90 platform share compatible frames, beams and accessories, so mixed layouts can be planned as one integrated storage scheme.
Yes. Retrofit projects typically combine re-layouts, higher-density systems such as drive-in, push-back, pallet shuttle or mobile racking, mezzanine floors and narrow aisle configurations. High-density pallet racking can deliver up to 20% more storage capacity within the same building footprint, avoiding the cost and delay of new construction.
Provide the warehouse location, floor plan, clear height, pallet dimensions, load per pallet, number of SKUs, pallet positions required, handling equipment and any cold-chain, seismic or fire-protection requirements. Procurement and engineering teams can email [email protected] with these details so a proposal and layout drawing can be prepared.
Use the catalog for preliminary system selection, then share your warehouse location, clear height, pallet dimensions, loads and handling equipment for a project-specific recommendation.