Pull-Out Units for Pallets and Small Parts Picking

Up to 1,000 kg

Manual and electric load options, subject to rack and floor verification.

Three-sided access

Pick from the front and sides in an upright working position.

62–100% extension

Partial, full and two-way extension options for different pallet profiles.

Retrofit ready

Beam, upright and floor-mounted designs for new or existing racking.


Picking Ergonomics

Bring the Load Within Reach, Not the Operator Into the Rack

A pallet pull-out unit turns difficult bottom-level or deep-bay positions into accessible pick faces by extending the load into the aisle.

Operators no longer need to bend under beams or stretch to the back of a pallet. With direct access from up to three sides, picking becomes more controlled, faster and easier to standardise. Real Nice Racks LLC supplies pull-out units for pallets, containers and small parts, and supports projects from initial layout review through load verification and installation.

  • Manual, upright, electric and compact module configurations
  • Beam, upright and floor mounting for retrofit or new racking
  • Project review covering load, clear height, aisle width and floor condition
Pull-out unit extended from pallet racking for ergonomic order picking
3 sidesAccess to the load when pulled into the aisle

What Are Pallet Pull-Out Units

What Are Pallet Pull-Out Units?

A pallet pull-out unit, also called a pallet drawer, is a platform on runners installed within a pallet rack bay. It extends the pallet or load carrier out of the rack and into the aisle, giving the operator direct access to the load.

Unlike full goods-to-person automation, a pull-out unit keeps the person-to-goods principle but removes common losses: reaching into deep bays, bending below beams and moving a forklift simply to access the back of a pallet. Units are available for manual or electric operation and can be mounted on beams, uprights or the floor.

Access

Safe reach into every position

Extending the load brings all pick faces into a comfortable working zone and reduces over-reaching, twisting and unnecessary handling.

Density

More pick faces in the same rack

Less clearance is needed above each load when picking takes place in the extended position, allowing more pick levels in the available height.

Flexibility

Manual picking without full automation

No software, controls or automatic shuttle infrastructure are required. The system remains practical for changing SKUs and phased growth.


Your Starting Point

Which Warehouse Situation Matches Your Requirement?

Use these scenarios to identify whether pull-out units are a practical fit before a detailed engineering review.

Picking from the bottom pallet level

Operators bend under the beam, the back of the pallet is out of reach and cartons are pulled forward by hand. Pull-out units can be added to the existing racking to improve access.

Rack full and assortment growing

Every new pick face competes for rack length or floor space. Low-profile pull-out units can help convert unused clearance into productive pick levels.

New warehouse or new picking zone

Picking remains manual for now and the layout must stay open for growth. Pull-out levels can be planned into new racking from the start.

Heavy components and frequent picks

Pulling a heavily loaded pallet by hand is not suitable, and using a forklift for every access adds delay. Electric units move the load at the push of a button.

Small parts in deep shelving

Boxes sit at the back of deep shelves, search times increase and items are overlooked. Compact modules move the shelf to the operator.

Project and spare-parts storage

Components can be grouped by project, machine or work order on pull-out platforms, keeping items visible and accessible without occupying additional floor area.


Person-to-Goods, Optimised

How Pull-Out Units Improve Manual Order Picking

Most warehouses still use person-to-goods picking. Pull-out units keep that principle and remove its common inefficiencies.

Speed

Shorter travel times

More pick faces per metre of rack bring the assortment closer together and reduce walking between locations.

Ergonomics

Better working posture

No bending under beams and no reaching to the back of the pallet when the load is extended into the aisle.

Productivity

Faster picking process

Access from three sides keeps items in view, simplifies counting and reduces searching within mixed pallet loads.

Handling

Less equipment dependency

No pallet truck or forklift is required simply to reach the back of a pallet for routine picking.

1,000 kgMaximum unit load, depending on model and mounting
6 vs 4Picking locations possible in a documented retrofit
100%Extension available for full load access

Comparison

Static Racking, Pull-Out Units or Automated Storage?

Pull-out units bridge the gap between a conventional static pick face and a fully automated goods-to-person system.

01

Static racking

Lowest initial cost and simple operation, but the back of deep pallets can be hard to reach and pick-face counts are limited by beam clearance.

Lowest entry costLimited reachManual picking
02

Pull-out units

Moderate investment, no software, and the load comes into the aisle for three-sided access. More pick faces fit within the same rack height.

ErgonomicFlexibleRetrofit-friendly
03

Automated storage

Highest investment, with software, controls and service contracts. Best suited to very high throughput and 24/7 operations.

High throughputSoftware-drivenCapital intensive

Selection Guide

Select the Right Pull-Out Unit for Your Load and Workflow

Start with the load, extension required and whether the project is a retrofit or new build. Final selection follows a rack and floor check.

Universal

Universal pull-out units

Beam or floor mounting for retrofit and flexible layouts. Extension options from 62% to 100% or two-way access. Load range typically 300–1,000 kg.

Upright

Upright pull-out units

Mounted on uprights to create more pick levels per bay. Typical load range 500–1,000 kg with 62–100% extension.

Electric

Electric pull-out units

Powered extension for heavy loads and frequent cycles. Available with 840 mm or 1,100 mm extension, 230 V mains or 18 V battery operation.

Compact

Compact modules

For small parts and production supply. Common width is 880 mm to fit between pallet racks. Fixed or mobile, with 70% or 100% shelf extension.


Product Families

Pull-Out Unit Solutions Supplied by Real Nice Racks LLC

Core families cover most pallet, container and small-parts applications, with customised designs available for unusual loads.

Universal pull-out units installed in pallet racking
Universal

Universal Pull-Out Units

Beam- or floor-mounted units for existing racking and flexible layouts. Suitable for pallets and pallet collars with 62–100% extension and loads from 300 kg to 1,000 kg.

Upright pull-out units creating additional picking levels
Upright

Upright Pull-Out Units

Mounted directly on the uprights to gain more pick levels within the same rack height. Typical capacity is 500–1,000 kg per unit with 62–100% extension.

Powered pull-out unit for heavy loads and frequent order picking
Electric

Electric Pull-Out Units

Powered extension for heavy loads and frequent picks. Up to 1,000 kg, with 840 mm or 1,100 mm extension and 230 V or 18 V battery operation.

Compact pull-out module for small parts and production supply
Compact

Compact Picking Modules

Pull-out modules for small parts, typically 880 mm wide to fit between pallet racks. Fixed or mobile with 70% or 100% shelf extension.

Customised pull-out unit for special loads and heavy components
Custom

Customised Pull-Out Units

Special designs for very heavy goods, drums and barrels, long goods, divided compartments and other load carriers that do not fit standard modules.

Pull-out trays and shelves for containers and small components
Trays & Shelves

Pull-Out Trays and Shelves

Extendable trays and shelves for containers, tools and small components. Typical shelf load range is 200–300 kg, subject to the final configuration.


New Build and Retrofit

Retrofit Existing Racking or Plan Pull-Out Units Into a New Warehouse

Pull-out units can usually be added to existing pallet racking, but the design must be checked because an extended unit shifts load toward the front beam. For new buildings, pick levels and clearances can be designed from the start.

  • Existing racking: beam-mounted or floor-mounted units, with phased installation where required
  • New warehouse: coordinated layout with racking, aisle widths, sprinklers and handling equipment
  • New picking zone: dedicated area for a new product range, production supply or small-parts block
Racking and pull-out units planned together for a warehouse picking zone

Racking and pull-out units can be planned together for new facilities or installed in phases in an operating warehouse.


Safety and Compliance

Engineering Checks That Support Safe Daily Use

Pull-out units are simple to operate but must be selected and installed as part of the racking system. Real Nice Racks LLC reviews load, clearance and operation before recommending a unit.

Beam and upright loadAn extended unit shifts the load to the front, so beam capacity and upright loading are checked for the extended position.
One unit per beam sectionOnly one pull-out unit per beam section should be extended at a time. Units not in use should be closed.
Pallet stops and anchoringStops position the load; floor-mounted units are anchored as required by the project design.
Powered safetyElectric units include stop and collision-sensing features for controlled movement.
Inspection and serviceRack inspection, maintenance and spare parts can be included in the support plan.
Project documentationLoad signage, user instructions and installation records should be included at handover.

Racking design for the wider system can be coordinated with recognised principles such as EN 15512, FEM 10.2.08 / EN 16681 and EN 15620 / EN 15635, plus applicable local building and seismic requirements. Final capacities and user instructions are always project-specific.


Project Evidence

More Pick Faces in the Same Rack Footprint

In a documented retrofit for an industrial manufacturer, pull-out units with full extension were installed on two levels of existing pallet racking to improve working height and access.

The result was more picking locations within the same rack height, combined with reduced stretching and bending for operators. The exact outcome depends on rack dimensions, clear height, load profiles and safe working practices.

+33%Storage capacity in the documented retrofit
6 vs 4Picking locations in the same bay
100%Extension for full load access

Use this example as a starting point only. Real Nice Racks LLC will verify your own rack, load and layout before proposing a solution.

Pull-out units installed in existing pallet racking to create more picking locations

A retrofit can improve picking ergonomics without relocating the warehouse.


How We Work

From Picking Analysis to Long-Term Support

A clear project sequence keeps decisions, load checks and installation activities aligned.

1. Analyse

Review picking task, pallet or container data, rack condition, clear height and aisle constraints.

2. Design

Select unit type, mounting, extension and quantity; check load and operating clearances.

3. Supply

Coordinate production, export packing and delivery to the agreed port or site.

4. Install

Install and commission racking and pull-out units with safe handover documentation.

5. Support

Provide rack inspection, maintenance and spare parts support over the system lifecycle.


FAQ

Frequently Asked Questions About Pallet Pull-Out Units

Technical and commercial questions from warehouse owners, 3PLs and system integrators.

What is a pallet pull-out unit?

A pallet pull-out unit is a platform on runners inside a rack bay that extends the pallet or load carrier into the aisle. It allows the operator to pick from up to three sides in an upright position. Units can be beam, upright or floor mounted and can be manual or electric.

How much weight can a pull-out unit carry?

Manual pull-out units typically carry 300 to 1,000 kg per unit depending on model and mounting. Trays and shelves usually carry 200 to 300 kg. Electric units can carry up to 1,000 kg evenly distributed. Final capacity depends on beam, upright and floor verification for the extended load position.

Can pull-out units be retrofitted into existing pallet racking?

Yes, in most cases. Beam-mounted units fit to existing beams, while floor-mounted units stand independently. Because an extended unit shifts load toward the front, the existing racking must be checked for beam capacity, upright loading, anchoring, clearances and safe working aisles before installation.

How do pull-out units improve ergonomics and productivity?

The load comes into the aisle, so operators avoid bending under beams or reaching to the back of a pallet. Picking from three sides keeps items in view, reduces searching and handling, and can create more pick faces in the same rack height.

What is the difference between 70% and 100% extension?

A 62 to 70% extension brings the front part of the load into the aisle for regular access to the face of the pallet. A 100% extension brings the whole load surface out so every item is within reach. Two-way models extend to both sides of the rack.

When is an electric pull-out unit the right choice?

Choose an electric unit when loads are heavy, picks are frequent or operators should not pull loads by hand. Electric units can move up to 1,000 kg with 840 mm or 1,100 mm extension, using 230 V mains power or an exchangeable 18 V battery.

Can several pull-out units be extended at the same time?

No. Only one pull-out unit per beam section should be extended at a time because an extended unit shifts load to the front beam. Units not in use should be closed.

What information is needed for a pull-out unit quotation?

Provide the rack type and condition, pallet or container dimensions, load per unit, required extension, picks per day, clear height, floor condition, mounting preference, delivery location and any site constraints. Email [email protected] to start the review.

Do you supply compact modules for small-parts picking?

Yes. Compact modules are typically 880 mm wide to fit between pallet racks. They can be fixed or mobile and offer shelf extension for small parts, production supply and order picking.

How are safety and compliance handled?

Projects include load verification, safe operating limits, pallet stops, anchoring where required, and electric safety functions for powered units. Racking design can be coordinated with EN 15512, FEM 10.2.08 / EN 16681 and EN 15620 / EN 15635 principles, plus applicable local requirements. Final load signage and instructions are project-specific.

Warehouse with pallet racking prepared for an ergonomic picking zone
Next Step

Plan Your Picking Zone with Real Nice Racks LLC

Share the rack type, load per unit, pallet or container dimensions, required extension, picks per day and clear height. Our team will recommend the appropriate pull-out unit and confirm what needs to be checked before installation.

Email: [email protected]

Inquire Now