Pallet Live Rack Push Back Pallet Rack

Product Description

Push-back pallet rack for high-density warehouse storage

Products Description

Push-back pallet racking is designed for high-density storage. The depth is usually within five pallet positions. The rack uses a first-in, last-out (FILO) access mode.

Characteristics

  • Suitable for warehouses with high cost per unit area, such as cold storage and warehouses in prime downtown locations.
  • Provides 20%–30% selectivity.
  • Both safety and operating efficiency are higher than those of drive-in racks (drive-through racks).
  • Compared with adjustable pallet racking, it increases floor utilization by about 60%.
  • It can be used with a reach forklift or a counterbalanced forklift, and its forklift operation requirements are lower than those for drive-in pallet racking.

Components

The main components are upright frames, beams, support rails, and carrying carts. The rack has a bolted structure and is easy to dismantle and install in a new location.

Push-back pallet rack component structure
Middle cart for push-back pallet rack

Middle Cart

Made of square tube. To save cost, the structure can be as simple as shown in the picture. Each cart has 8 bearings. The design can be customized according to clients' needs.

Small cart or first cart for push-back rack

Small Cart or 1st Cart

Made of angle steel and square tube. To save cost, the structure can be as simple as shown in the picture. Each cart has 8 bearings. The design can be customized according to clients' needs.

Protect rail for push-back pallet rack

Protect Rail

Made of C-shaped or U-shaped steel. When the ground level requires no carts and pallets are placed directly on the ground, a protect rail is recommended.

Product Information

Rack Type
Push-back pallet rack
Rack Cost
Low, medium-low, medium, ✓ medium-high, high, higher
Pick-up Mode
First in, last out (FILO)
Structure
Knock-down or bolted
Forklift Aisle
Around 3200 mm, depending on the customer's forklift parameters
Load Capacity & Dimension

Load capacity: ≤1500 kgs/pallet

Size: Customized based on the client's pallet

Components

Core components: frame (upright, also called column or post, bracing, base plate, fasteners), beam, support rail, cart, spacer

Other: upright protector, frame protector, guide rail, protect mesh

Core Components Specification

Upright (mm): 80×60, 90×60, 90×70, 100×70, 120×95, 120×135

Beam (mm): 80×50, 100×50, 110×50, 120×50, 130×50, 140×50, 160×50

Finish
Epoxy resin electrostatic spraying (powder coating), galvanized
Coating Thickness
No less than 60 μm average thickness for powder coating
Material
Q235B, or Q355
Color
RAL5015 (sky blue), RAL5005 (signal blue), RAL2004 (pure orange), RAL1003 (signal yellow), RAL7035 (light grey). Customized colors are available when ordering above 2×40GP containers.

Store & Withdraw

Loading

The carrying cart runs along the inclined support rail. The first pallet is placed on the carrying cart; the second pallet pushes the first pallet back into the rack; the third pallet pushes the front two pallets into the rack. The remaining pallets follow the same operation.

Unloading

The pallet at the pick-up end is carried out first. The next pallet slides to the pick-up point by gravity for unloading, and the others follow the same process. Unlike a drive-in pallet rack, the forklift truck does not drive into the rack.

Store and withdraw operation of push-back pallet racking
Push-back pallet rack product display Push-back pallet rack warehouse application Push-back rack structure detail Push-back pallet rack storage system High-density push-back pallet rack Push-back racking cart and rail system Push-back pallet rack installation

Our Services

Warehouse rack design, production and installation services

Packaging & Shipping

To suit different clients' needs, HBrack uses different storage methods. The following rules are followed.

  • For container orders: stretch film + carton board + packing belt + plywood stick + plywood pallet leg.
  • For less-than-container orders: plywood box or another method that can keep the product safe during transportation.
  • Other: based on clients' needs, such as vacuum packing etc.
Push-back pallet rack packaging method Warehouse rack shipping and packing

Buying Guides

Push-back pallet rack buying guide Warehouse pallet rack selection guide

Company Information

Nanjing Hongbo Metal Products Co., Ltd. (hereafter referred to as HBrack) is a company full of vitality, committed to providing clients with better metal products and service. HBrack has designers who have been engaged in warehouse rack design for more than 10 years. They have rich experience in complex structures. The products provided include adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage, and other warehouse storage-related products. The services provided include storage rack design, production, and installation. The products delivered range from common pallet racks to complex mezzanine floors.

Nanjing Hongbo Metal Products warehouse rack company
HBrack product range and company information

FAQ

1. Are you a factory or a trading company?

We are a factory and also trade products related to warehouse racks.

2. Do you provide samples? Are they free or extra?

We provide sample parts free of charge, and you only need to pay the freight. When a whole sample rack is required for testing, please contact us for the sample cost.

3. I would like to visit you. Which city should I go to?

We are in Nanjing. When needed, we can help you book a hotel and traffic tickets. We will pick you up at the destination, and our salesperson and driver will be with you during the visit.

4. Why choose HBrack?

1. HBrack has engineers who are professional in warehouse rack design with more than 10 years of experience and can handle projects from simple structures to complex ones.

2. Your money is safe with HBrack. We accept trading through a third party. The salespeople have rich experience in warehouse racks, and all personal information is trackable.

3. HBrack offers different designs to help clients control their budgets.

5. What is the rack type and pick-up mode?

It is a push-back pallet rack with a first-in, last-out (FILO) access mode. The carrying cart runs along the inclined support rail for storage and withdrawal.

6. What are the main components and packaging methods?

The main components include upright frames, beams, support rails, and carrying carts. For container orders, HBrack uses stretch film + carton board + packing belt + plywood stick + plywood pallet leg. For less-than-container orders, plywood boxes or other safe transportation methods can be used.

Related Products